2 Burners 12 inch Gas Cooktop Stainless Steel NG/LPG Convertible Built-in Burner Cooktop

<p>Eascookchef Stainless Steel Gas Cooktop 12 inch</p> <p>2 Burners Power: 10,500 BTU + 5,000 BTU</p> <p>Fuel type: Natural Gas (NG) are preset and can be replaced with Liquefied Petroleum Gas (LPG) nozzles.</p> <p>Please note that:</p> <p>1) Extra LPG Nozzles included in the pageage, the natural gas pressure regulator and the gas pipe are NOT included.</p> <p>2)It is recommended that gas stove be installed and tested by professionals.</p> <p><br></p> <p>BAKELITE KNOB CONTROLS</p> <p>Melt-proof and anti-scalding bakelite knob controls,with child protection lock,need to press and rotate at the same time to ignite, preventing children from accidentally touching.</p> <p>THERMOCOUPLE PROTECTION</p> <p>Every burner unit is installed a thermocouple flame-out failure system (FFD), will automatically cut off the gas supply when the flame goes out unexpectedly, to avoid gas leakage.</p> <p>HEAVY-DUTY CAST IRON POT STAND</p> <p>One-piece heavy cast iron grate, easy to assemble and remove, will not deformed. The unique eight-claw structure is stronger and more stable than the four-claw and six-claw grate, can support the pot firmly, avoid letting the pan slip off.</p> <p>12 Inch Dual Fuel Gas Cooktop, Easy To Install</p> <p>The size of the two burners is different, just put in the gas stove burner and burner cover, easy to assemble in minutes.</p> <p>The gas hob should be connected to the gas-supply by a registered installer. During installation it is essential to fit an approved gas tap to isolate the supply from the hob for the convenience of any subsequent removal or servicing.</p> <p>Once the hob was installed, make sure all the connections are properly sealed, use a soapy water to test, never use flame.</p> <p>Installation of built-in gas cooktop</p> <p>This gas cooktop is for bulit-in use only, please verify the gas cooktop is the right size for you.</p> <p>Product Dimensions: 11.6" W x 20.4" L x 3.9"H</p> <p>Cut out Dimensions: 10.7" Wx 18.9" L</p> <p>For a correct installation, the following precautions must be followed:</p> <p>a) Fixing fittings (brackets, screws) are provided to place the gas cooktop on work top, measure 0.79 to 1.58 inch in thickness.</p> <p>b) In the event the gas cooktop is not installed on a built-in oven, a wooden panel must be inserted for insulation.This panel must be placed at least 0.79 inch distance from the bottom of cooktop.</p> <p>c) When installing the gas cooktop on a built-in oven, the oven should be placed on two wooden strips; in the case of a joining cabinet surface, remember to leave a space of 1.78 x 22 inch at least from the back side.</p>

• 12 inch Gas Cooktop with pot stand
• Preset NG nozzles(extra 2 Propane nozzles)
• 1/2 NPT Connector and Elbow Connector with sealing rings
• Mounting brackets and screws
• Sealing strip
• Cut-out Template Board
• User Manual
• Pan Support Material:Heavy-Duty Cast Iron
• Control Type: Bakelite Knobs Control
• Ignition Type: Electronic pulse ignition
• Voltage: 110V, 3-prong plug
• Cable Length: 4.5 Feet
• Installation Type: Built-in