23.66 Inch Tile Cutter,Dual Track Double Brackets Manual Tile Cutter,Tiles Cutter w Infrared Guide All-Steel Frame and Bonus Spare Tungsten Cutters Wheels Cutters Hand Tool

Description A manual tile cutter is a commonly used cutting tool in construction. The reinforced tungsten alloy cutting wheel can ensure efficient cutting. Simply apply appropriate pressure on the handle to push the cutting wheel into the tile for cutting. Compared to electric tile machines, manual tile machines are compact and easy to operate, making them suitable for cutting a wide range of tiles.DetailsErgonomic Handle: The curved ergonomic handle makes it easier to operate with less effort. The aluminum alloy handle has a non-slip rubber cover on the end, which does not hurt your hand and makes it more comfortable to use.Balancing Bracket&Ruler Bar: They can flexibly move within 90° to support the tiles and accurately measure them.ApplicationIt is suitable for cutting materials with a thickness within 3/5'' and width within 0.39-23.6'', such as wall tiles, groove tiles, raised tiles, patterned tiles, flat tiles, solid tiles, glazed tiles, polished tiles, glass tiles, and many other mainstream tiles. It can be used in multiple workshops and industrial sites.How to Use1. Fixed Position: Hold the handle with one hand, pull the slide back to the seat, and place the ceramic tile flat on the base plate (if necessary, extend the ruler to measure). Align the cutting line of the ceramic tile with the center support plate, and the front end of the ceramic tile should be close to the notch of the base plate.2. Score and Press Down: Lower the handle and make the cutting wheel contact with the surface of the ceramic tile. Push the handle forward lightly to cut a continuous, even straight line on the ceramic tile.3. Break-off: Lift the handle slightly backward, allowing the pressure block to fall smoothly onto the front end of the ceramic tile. Apply appropriate force to push the handle down, and the ceramic tile will break along the scoring line.SpecificationProduct Model: 800FCutting Wheel Model: YG96Color: BlueCutting Wheel Material: Tungsten AlloyHandle&Bearing Material: Aluminium AlloyBase Material: Aluminium Alloy, SpongeSlide Rail Material: Alloy SteelSlide Rail Surface Treatment: Hardening Process, Electroplating ProcessOperating Method: ManualGuide Rail: Dual TrackSpecial Function: Infrared PositioningBalancing Brackets&Ruler Bar Adjustable Angle Range: 0-90°Battery Type: 2* AAA (Included)Slide Rail Diameter: 20mm/0.78inBase Plate Thickness: 1.2mm/0.04inMaximum Cutting Width: 60cm/23.6inMinimum Cutting Width: 1cm/0.39inchMaximum Cutting Thickness: 15mm (3/5inch)Gross Weight: 8kg/17lbsPackage Size: 82*25*18cm/32*9*7inchBase Size (L*W): 81*20cm/31*7.87inchPackage Included1* Manual Tile Cutter (With Balancing Brackets+ Ruler Bar)1* English ManualNotes1. Shallow and thin knife marks result in a flatter edge of the tile when chipping, while deep and thick knife marks lead to a slanted and unattractive edge.2. Please note that the force used when pushing must be light and the cut marks on the top of the tile must not be interrupted, otherwise, the tile will be chipped.3. It is recommended that you choose a tile with a flat surface to cut.4. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. 5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• 【Precision Cutting for Flawless Results】Achieve smooth, burr-free cuts with the 800F manual tile cutter, featuring a reinforced YG96 tungsten alloy cutting wheel for exceptional hardness. The infrared positioning collimator and precise dual-track guide rail with a clear scale ensure high-accuracy cuts on ceramic, glass, and polished tiles up to 23.6" wide and 3/5" thick. With 5-10 times the efficiency of electric cutters, this tile cutting tool saves time and enhances joint aesthetics, reducing decoration costs.
• 【Eco-Friendly and Cost-Effective】This energy-saving ceramic tile cutter operates manually, requiring no power supply or petrol, making it an economical choice for workshops and industrial sites. The 81x20cm aluminum alloy base with a 1.2mm thick sponge pad ensures stability while cutting wall, groove, or glazed tiles, helping you save on energy costs without compromising performance.
• 【User-Friendly Design】Enjoy effortless operation with high-quality ball bearings for smooth rolling cuts and a highly visible tungsten alloy cutter wheel for easy monitoring. The adjustable 0-90° balancing brackets and ruler bar allow versatile cutting angles, making this tile cutter tool ideal for patterned or solid tiles in any professional setting.
• 【Enhanced Stability and Safety】The large, thickened aluminum alloy base and screw-reinforced handle provide superior stability for safe cutting. The shockproof U-shaped sheath and sponge pad protect tiles from breakage, ensuring reliable performance when cutting flat or raised tiles with this sturdy manual tile cutter.
• 【Durable and Long-Lasting】Built with a wear-resistant tungsten alloy cutting wheel, corrosion-resistant aluminum alloy handle, bearing, and base, and electroplated alloy steel slide rails, this glass tile cutter resists rust, shock, and deformation. The hardened 20mm diameter dual-track slide rail ensures extended service life, making it a dependable choice for cutting glass or ceramic tiles.