7.3L High Pressure Oil System IPR Air Test Fitting Compatible with Powerstroke, Compatible with Ford

- High Pressure Oil System IPR Air Test Tool - Test it the right way! Each year Motor Magazine selects the Top 20 most innovative new tools in the automotive industry. We are pleased to announce that the 6.0L IPR Air Test Tool was selected to receive this highly coveted award for 2014. Due to popular demand we now offer the IPR air test fitting / tool for the following engines also: International T444E, DT466E, CAT 3126, and Ford 7.3L THE PROBLEM: 7.3L engines may experience hard start and or no start issues. In some cases the no-start issue may occur only with the engine hot. If the observed ICP pressure during cranking is less than the required 500 PSI, then the problem is in the high pressure oil system. One of the first checks that should be made is to remove the plug from the top of the high pressure oil reservoir (in front of the fuel filter) to observe if the reservoir is full. If the oil is standing within an inch of the top of the reservoir, then the problem is in the high pressure oil system and could be caused by one of three things: - The high pressure oil pump itself -The IPR Valve - A high pressure oil leak WARNINGS As with any air tool, you will need to add your own air line quick-connect fitting. Since there are so many various air fitting in use, it is impractical to provide this part. Auto repair activities are hazardous. Always wear protective eye-wear. This tool is intended for usage by trained professionals. By using it you are certifying that you have the necessary skills and training to do so safely.

• Quickly determine the cause of high pressure oil leaks
• Test for IPR and High pressure oil pump failures
• Can be used with the 6.0L IPR Air Test Tool
• A must for every 7.3L tech
• Made in the USA / PATENT PENDING