A+B Epoxy 9906K Gray A+B Rezolin Epoxy Kit, 14 oz. Container Size, Box Container Type, Оne Расk

A+B Epoxy putty 14.0 oz. Is an easy-to-use, two part putty you simply mix and mold like clay - no complicated weighing or measuring required. Easy 1:1 cut what you need mix ratio, form it into any shape. It hardens in one hour and makes a final, steel-hard cure in 12 hours. Can cure under water. Provides a durable and permanent bond to: fiberglass, concrete, Brick, stone, glass, porcelain, Tile, ceramics, pottery, metal, copper, chrome, iron, wood, most PVC and countless other materials. Mixing and handling: make sure the application surface is free of gas, grease, oil, rust, dirt, and other debris. Roughing or sanding the surface is recommended. Mold the epoxy to the approximate shape of the repair and apply firmly, sealing and smoothing thoroughly and securely. Using rezolin a + b epoxy putty is amazingly easy, simply cut off equal parts of the a + b bars. Knead and roll in your hands or on a clean working surface until the colors merge. Make sure there are no streaks. Gloves are advisable for mixing and molding the putty products. Rubbing water on the surface will yield a professionally looking smooth surface. Let it harden and cure for the specified time: one hour hardening and 12 hour curing time for regular a + b epoxy. Clean all tools, reusable gloves, and hands, if necessary, with soap and warm water immediately after use. Some suggested uses: fill cracks or holes in decks and broken tiles - cures under water fill cracks and holes in pool or spa and underwater plumbing, pumps and drains - no draining required repair breaks, cracks or leaks in all types of plumbing fixtures and ceramics - tubs, toilets, sinks, tiles, caulking seals leaks in gasoline tanks and air conditioner systems repair all types of fiberglass cracks, holes and breaks insulating cable splices. Can be drilled and sanded once fully cured. Putty that is cold or below 70F will be harder to mix because it is stiffer and will take a little longer to set. Putty that is above 90F will be easier to mix because it is softer, but it and will have a shorter work life and will set in a shorter amount of time. Expect a steel hard cure overnight with the regular set putty and in about 3 - 5 hours with the fast set putty.

• Easy to Use 2 part hand moldable epoxy putty hardens in 50-60 minutes with final steel hard cure in 12 hours
• Can cure underwater
• Use for pool and SPA repairs (plaster, gunite or fiberglass), Boats, RV, Auto, at work and around the house
• Use on all types of plumbing fixtures and ceramics, tubs, toilets, sinks, tiles, caulking, fiberglass, sculpture, taxidermy, doll repair, carving, metal, pump housing, pool decks and broken tiles
• Made in the USA