DC12V 24V 300M 12 Channels 12CH Radio Controller RF Wireless Remote Control Overhead Travelling Crane System Receiver Numer Button Remote, Industrial Remote with Protective Cover*2

Package Include 1* Receiver (with cover, we send you 12V, if you need 24V, please tell me after order) 1* Remote Control (with battery, If you need extra remote control, please tell us. ) parameter Coverage: 500M Features: Input DC12V / DC 5V / DC 24V Working range of relay: AC110 ~ 240V or DC0 ~ 28V (relay output can control DC and AC devices) Channel: 12 channels Working temperature: -10'C- + 70'C Maximum operating current: 7A Working frequency:433MHz Sensitivity: ≥-102dBm Encoding type: learning code Size Receiver: 68mmⅹ48mmⅹ19mm Transmitter Size: 127 * 41 * 20mm Antenna: with internal antenna Control mode Description Toggle (1 button on / same button off) Latch (1 key on / another key off) Momentary (pushbutton function, Relay pulls as long as button pressed) Set the control mode Toggle: When the receiver is in the LEARNING state, press the 1 button on the remote control. Toggle (Channel 1 ~ 12): Press -> Open; Press again -> Close. Press A, channel 1 is switched on, press again, channel 1 is switched off. etc.. Momentary: When the receiver is in the LEARNING state, press the 2 button on the remote control. Currently (Channel 1 ~ 12): Press and hold-> Open; Freed -> Close. Press A, channel 1 is switched on, release button A, channel 1 is switched off. etc.. Latch: When the receiver is in the LEARNING state, press the 3 button on the remote control. Control mode Latched (Channel 1 ~ 12): Press -> Open, other relays off; Press other key -> Close. Press A, channel 1 is switched on; Press B button, channel 2 is switched on, and channel 1 is switched off. etc.. Toggle + Momentary: When the receiver is in the LEARNING state, press the 4 button on the remote control. Control Mode Toggle (Channel 1 ~ 6) + Control Mode Momentary (Channel 7 ~ 12) Toggle + Momentary: When the receiver is in the LEARNING state, press the 5 button on the remote control. Control Mode Toggle (ONLY Channel 1) + Control Mode Momentary (Channel 2 ~ 12) ATTENTION: If you want to use other control modes, you need to delete the original modes. Learning and steps 1. Press the learn button of the receiver until the LED indicator lights up, the receiver remains in the status of READING. 2. Then you can press the key according to your request. If the LED flashes 1 time (the buzzer sounded once), it means that the learning is successful. Delete the learned code Press and hold the receiver's learn button for 8 seconds until the LED indicator is off (Buzzer sounded for about three seconds), it means that all saved codes have been successfully deleted.

• wide voltage input: DC12V or 24 V with 5 working mode, remote distance:300m (in the free field) wireless control, easy to install. The range is about 300m in the open air, it can simply pass through walls and so on. But please note: trees, walls or other obstacles will shorten the range.The product has 6 working modes.
• Signal stability + dry contact: RF remote control uses RF technology and stable signal. The radio receiver is a relay output/potential free, with NO, NC, COM, （Normally open+Normally closed+Common terminal.
• Wireless control, easy to install. Application scenarios, Used in industrial control and security fields: such as lamps, electric doors, winches, motors, lifters, gates, remote controls, etc.
• The product has stable performance, and high receiving sensitivity. The product comes with a one-year warranty. If you don't know how to connect the wires, you can contact us and we will assist you.