Dryer Heating Element Kit Compatible with Amana NED7200TW NED7200TW10 NED7200TW0 fits Inglis YIED7200TW10 Full Replacement Kit with Thermostat, Thermal Fuse & Thermistor

High-Quality Heating Element Kit – Compatible with Samsung Dryers, designed to help fix common issues such as no heat, long drying cycles, and inconsistent temperature. Package Includes:1 × Heating Element DC47-00019A, 1 × Thermostat DC47-00018A, 1 × Thermal Fuse with Bracket DC96-00887A, 1 × Thermistor DC32-00007A, 1 × Thermal Fuse DC47-00016A. Specifications: Power Output 5400W | Voltage 240V | Terminal Size 2-5/16 inches. Compatible Models: DV395ETPASU/A1-00 DV395ETPAWR/A1-00 DV400EWHDWR/AA-00 DV400EWHDWR/AA-01 DV405ETPASU/AA DV405ETPASU/AA-00 DV405ETPASU/AA-01 DV405ETPASU/AC-01 DV405ETPASU/AC-IN01 DV405ETPAWR/AA DV405ETPAWR/AA-00 DV405ETPAWR/AA-01 DV407AEW/XAA-01 DV407AEW/XAA-02 DV407AEW/XAA-03 DV409AER/XAA-00 DV409AER/XAA-01 DV409AER/XAA-02 DV409AER/XAA-03 DV409AER/XAA-04 DV409AEW/XAA-00 DV409AEW/XAA-02 DV409AEW/XAA-03 DV40J3000EW/A2-00 DV40J3000EW/A2-01 DV40J3000EW/A2-02 DV410AER/XAA DV410AERXAA DV410AEW/XAA DV410AEW/XAA-01 DV410AEW/XAA-02 DV410AEW/XAA-04 DV410AEW/XAC-0001 DV410AEW/XAC-0002 DV419AEU/XAA-00 DV419AEU/XAA-01 DV419AEUXAA0000 DV419AEUXAA0001 DV419AEW/XAA-00 DV419AEW/XAA-02 DV419AEWXAA0000. Quick & Easy Installation: Disconnect power, remove the panels, unhook the belt and drum, replace the old heating element with the new unit, then reassemble and restore power. Common Problems Solved: 1. Dryer won’t heat or start 2. Sudden shutdowns 3. Dryer takes too long to dry 4. Temperature errors Wibefel Dryer Heating Element and Thermistor Kit Installation Guide. (For Reference Only – Professional Help Recommended). Ensure your dryer is unplugged and has fully cooled down before starting. 1. Access the Heater Housing: Remove the rear or lower panel to reach the heating element and thermistor. 2. Document Wire Positions: Take a clear photo of the existing connections before removing the old part. 3. Remove and Clean: Disconnect the old thermistor. Clean surrounding lint and dust from the heater housing and vent. 4. Install New Thermistor: Securely mount the new part and reconnect wires exactly as they were. 5. Replace Associated Components: If the thermal fuse or high-limit thermostat has failed, it should be replaced at the same time. 6. Multimeter Check: The new thermistor should show measurable resistance (not ∞ and not 0 Ω). 7. Reassemble and Test: Reassemble the dryer, run a 2–3 minute air-only test, then a short heated cycle. Verify Function: Ensure proper airflow, intact wiring (no contact with the heating element), and confirm correct breaker settings. If you are unsure or uncomfortable with installation, we highly recommend consulting a qualified appliance technician. This all-in-one replacement kit makes dryer repair fast and hassle-free. Perfect for DIY users or professionals, it provides consistent heat and dependable performance to keep your laundry routine running smoothly. This replacement kit is designed to fit the listed models. Brand names and model numbers are used only to indicate compatibility.

• Brand: Wibefel
• Full Replacement Kit: 1 x Dryer Heating Element, 1 x Thermal Cut-Off Fuse and Bracket, 1 x Dryer High-Limit Thermostat, 1 x Dryer Thermal Cut-Off Thermostat, 1 x Dryer Thermistor.
• Compatible with Samsung: DV203AEW/XAA-00 DV209AEW/XAA-00 DV209AEW/XAA-01 DV209AEWXAA DV209AEWXAA0000 DV209AEWXAA0001 DV210AEW/XAA DV210AEW/XAA-00 DV210AEW/XAA-01 DV210AEW/XAA-02 DV210AEW/XAA-03 DV210AEW/XAA-04 DV210AEW/XAA-IN01 DV210AEW/XAC-0001 DV210AEW/XAC-0002 DV218AEB/XAA-00 DV218AEB/XAA-01 DV218AEB/XAA-02
• DV218AEB/XAC DV218AEW/XAA-00 DV218AEW/XAA-01 DV218AEW/XAA-02 DV218AEW/XAC DV219AEB/XAA-00 DV219AEB/XAA-01 DV219AEB/XAA-02 DV219AEW/XAA-00 DV219AEW/XAA-01 DV219AEW/XAA-02 DV219AEWXAA0000 DV219AEWXAA0001 DV220AEW/XAA DV220AEW/XAA-00 DV220AEW/XAA-01 DV220AEW/XAA-03 DV220AEW/XAA-04 DV220AEW/XAC-0001 DV220AEW/XAC-0002
• Restores Performance: Fixes dryers that take too long to dry, don’t heat properly, overheat, fail to start, or shut off too soon.
• Wibefel heating element for Samsung dryer: Features an upgraded wire design that is 25% longer, with 65% higher resistance, providing more stable and consistent heating performance.
• Installation Guide: Unplug dryer and let it cool. Remove rear/lower panel to access heater housing. Take a photo of wire positions. Disconnect and remove old thermistor. Clean lint/vent path. Mount new thermistor; reconnect wires exactly as original. Replace blown thermal fuse/high-limit thermostat at the same time. Check with a multimeter (sensor must be not open and not short). Reassemble; run 2–3 min air-only test, then a short heated cycle. If no heat: verify wiring, breakers, and vent airflow.