Gohantee High Pressure Oil System IPR Air Test Tool Special Kit Compatible with Ford 6.0L-7.3L Powerstroke Diesel, with 6.0L 7.3L High Pressure Oil System IPR Valve Air Test Fitting, Gauge Air Meter

The air test tool kit compatible with Ford 6.0L - 7.3L powerstroke engines, includes 7.3L powerstroke high pressure oil system IPR air test fitting. The heavy-duty hydraulic hose is rated up to 5,300 PSI.Function:High pressure oil leaks are the major weaknesses of the 6.0L-7.3L diesel engine and cause a hard-start or no-start condition when engine is hot. Engine builders can quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle. Air test tool kit replaces IPR valve so that the system can be completely sealed and quickly pinpoint any size leak in the high-pressure oil system of 6.0L and 7.3L engines and even the smallest leaks can be detected.Easy Installation:The high pressure oil system test tool is very easy to install and each tool includes three extra o-ring sets for the IPR fitting. To connect, just remove the air cleaner, FICM, and coolant degas bottle (Turbo removal is NOT required); Then remove the IPR and thread in the tool, hand tightening using the hose is sufficient; Finally Connect shop air and listen for leaks.To locate the smallest leaks need to close the shutoff on the tool to seal the system.High-Quality Materials:IPR air test tool kit is made of high standard copper, steel and rubber and can be used perfectly with the fitting and IPR adapter. High strength steel fitting for better sealings, without leakage and features with high hardness, good wear and corrosion resistance.Package Include:1Pc x Hose; 1Pc x Valve; 1Pc x 6.0 ICP fitting; 1Pc x 7.3 ICP fitting; 1Pc x Air meter; 2Pcs x Interconnectors; 3Pcs x Copper washer; 1Pc x PTFE tape; 1Pc x T fitting; 1Pc X Double port fitting.

• [Perfect Compatibility] The air test tool kit compatible with Ford 6.0L - 7.3L powerstroke engines, includes 7.3L powerstroke high pressure oil system IPR air test fitting. The heavy-duty hydraulic hose is rated up to 5,300 PSI
• [Function] High pressure oil leaks are the major weaknesses of the 6.0L-7.3L diesel engine and cause a hard-start or no-start condition when engine is hot. Engine builders can quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle. Air test tool kit replaces IPR valve so that the system can be completely sealed and quickly pinpoint any size leak in the high-pressure oil system of 6.0L and 7.3L engines and even the smallest leaks can be detected
• [Easy Installation] The high pressure oil system test tool is very easy to install and each tool includes three extra o-ring sets for the IPR fitting. To connect, just remove the air cleaner, FICM, and coolant degas bottle (Turbo removal is NOT required); Then remove the IPR and thread in the tool, hand tightening using the hose is sufficient; Finally Connect shop air and listen for leaks. To locate the smallest leaks need to close the shutoff on the tool to seal the system
• [Precautions] If desired, a scan tool can be used to monitor air pressure in the system by observing the ICP sensor reading but this is not a required step. Be careful: to prevent costly repairs we recommend air checking every 6.0L 7.3L for high pressure oil leaks after any part of the system has been disassembled
• [High-Quality Materials] IPR air test tool kit is made of high standard copper, steel and rubber and can be used perfectly with the fitting and IPR adapter. High strength steel fitting for better sealings, without leakage and features with high hardness, good wear and corrosion resistance. Package include:1Pc x Hose; 1Pc x Valve; 1Pc x 6.0 ICP fitting; 1Pc x 7.3 ICP fitting; 1Pc x Air meter; 2Pcs x Interconnectors; 3Pcs x Copper washer; 1Pc x PTFE tape; 1Pc x T fitting; 1Pc X Double port fitting