JT-19 Dental Wet Model Trimmer, 500W Abrasive Diamond Disc Wheel Gypsum Dressing Machine, 2800RPM Gypsum Abrasive Trimmer High Torque Enlarged Windows Adjustable Angle

★★★★☆ 4.0 83 Bewertungen

€95.20
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von castellidiario.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€95.20
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 24.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von castellidiario.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 219291966 Erscheinungsdatum 2026/05/03 Listenpreis €95.20 Modellnummer 219291966
Kategorie

How to use:1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve2. Connect the waste-disposal tube to the unit3. Connect the power cord, and switch on the power switch (O=off, l=on)4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)Attention:If there is some abnormal noise when working onPossible reason:① Axon is loosing ② Disc is not plain enough。How to solve it:①Dissemble the disc⒃ with spanner,make the snapRing tightly;② change the disc。The machine does not work when power onPossible reason:① fuse get burnt;② motor get burnt;③ switch get wrong。How to solve it:① change the fuse(22) which inside the socket;② change the motor ③ change the switchSpecifications:Voltage: 110V/50Hz±10%Power: 500W Rotational Speed: 2800 rpmDimensions: 44×35×35cm Weight of the dental trimmer: 20kgDisc Diameter: fits 23.5-32cm / 9inch - 12.5inchPackage:1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment

  • 【High Quality】This unit is made of rust-proof all-cast aluminum which enables the users to achieve perfect trimming quality. They feature heavy construction and balanced direct-drive systems that run quietly, and stay steady and trouble-free while performing on the job.
  • 【Strong Power】: 500W engine of the plaster dresser. Constant size, stable performance, no fatigue. 2800 revolutions per minute for easy slicing. In the trimmer workshop, noise and vibration are prevented by the perforated disk at the bottom.
  • 【Professional Applications】: Model Trimmer is widely used in restorative dentistry.It is a necessary tool for trimming plaster models,This machine is made of rust-proof all-cast aluminum which enables the users to achieve perfect trimming quality.
  • 【High Stability】: The dental profile trimmer weighs more than 20 kg and is mounted on non-slip feet. The trimmer can be made to work dry, but it is recommended to work under water.
  • 【Ergonomic】: The wet model trimmer has a rounded external shape for easy cleaning. Wide gradient and tilting table, full-screen window, cleaning size to work at 3 different angles, adjustable screws.
Manufacturer mangenokn
Item model number JT19X

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4 von 5
★★★★☆
83 Bewertungen | 34 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
75% (62)
4 Sterne
8% (7)
3 Sterne
4% (3)
2 Sterne
2% (2)
1 Stern
11% (9)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.