J.W. Winco 927.7-63-M5-A GN927.7 Clamping Lever with Eccentrical Cam, Tapped Type, Lever with Stainless Steel Components and Adjustable Contact Plate, M5 x 0.8" Thread

GN 927.7 clamping levers with eccentrical cam are used for rapid clamping and releasing operations. In contrast to a clamping operation utilizing only threads and a lateral force, these levers permit torque-free clamping via a combined downward vertical and cam actuated motion. The lever has been designed to insure that its movement cannot exceed the maximum clamping position. There are no loose components since all are assembled and mounted in their correct order. Advantages of the Type A (adjustable contact plate): The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut. This permits the maximum clamping force to be set by a simple adjustment. In addition this also permits the selection of a preferred lever position in relation to the clamping lever pin. With these clamping levers, thrust forces of up to 8 kN (1800 lbf) can be obtained.

• M5 x 0.8 Tapped Thread
• RoHS Compliant
• With Adjustable Contact Plate with Setting Nut - Contact Plate: Stainless Steel Super Duplex 255 Material Hardened, Setting Nut: Stainless Steel, European Standard No. 1.4305 (American Standard Series 303)
• 63mm Handle Length
• 1.5mm Adjustable Range