Motor Guard D-12-1CJ Disposable Spray Gun Filter, 25-Jar

This is the filter that ends painting failures by absorbing oil aerosols, condensed moisture, and contaminants as small as .01 microns. It attaches directly to the air inlet of the spray gun, and as air is passed between the patented spiral wound element’s compressed layers, particles as small as .01 micron are entrapped. This incredible filtration is accomplished at a true 30 CFM to the spray gun. All this, while at the same time providing maximum efficiency, with a minimal pressure drop at the optimum flow rate. Eliminate painting failures with the D-12 by removing wet, dirty, damaging air. This filer holds more moisture with a lower pressure drop at the highest flow rate available. Designed to remove the smallest contaminant particle, oil-aerosol or drop of moisture to supply Clean, Dry, Oil-Free air to the spray gun. Users of the D-12 report reduced paint defects, resulting in increased Paint Department productivity with the ultimate final finishes.

• Pipe Size is 1/4 NPT, Nominal Airflow is 30 CFM, Filtration Rating is .01 Micron, Maximum Pressure is 100 PSI and the Temperature Range is 32-120 F
• Reach in Jar of 25 Filters
• This is the filter that ends painting failures by absorbing oil aerosols, condensed moisture, and contaminants as small as .01 microns
• Holds more moisture with a lower pressure drop at the highest flow rate available
• Made in USA