OREI HDMI Extender Over Ethernet CAT5e/CAT6 Power Over Cable - HDBaseT - Zero Latency - 1080P Upto 500 Feet -IR Signal

using a single cat5e/6/6a cable, the bhdbt-tr-si-er transmits uncompressed hdmi audio and video, rs-232 serial and ir control signals up to 500 feet(150 m) from the previous unit in the chain(either the transmitter or another transceiver), including 1920 x 1080(1080p) signals @ 60 hz. rs-232 serial signals and ir remote control signals(@ 39 khz) also pass through the transceiver, so your hdbaset installation can control such rs-232 devices as scanners and touchscreen displays at baud rates up to 115 kbps. you can also operate a blu-ray player using its remote when at the remote monitor and vice versa. attach the orei extender to a wall, rack or pole using the included hardware. a good quality cat5e/6/ stp shielded cable is essential in delivering quality content. cat6 is recommended for better performance. avoid using signal converters/adapters.<br><b>SKU:ADIB079M2BFKD</b>

• Extender Full HD 1080P Single upto 500 Feet VIA CAT5/CAT6/CAT7 Cable. HDBaseT Technology - Uncompressed Singnal for Zero Latency
  
  
  Video Resolutions up to 4K@60Hz and 2K@60Hz
• Power Over Cable - only use one included power adapter at either transmitter side or the receiver side to power both units
• Bi-directional IR control - enables source device to recognize remote commands from remote display or control the remote display from the source device
• RS-232 Control - accepts control commands via PC interface
• The package includes OREI EX-500IR HDMI Extender (Transmitter & Receiver Units), 2x IR Tx Cables, 2x IR Rx Cables, 1x Power adapter, Mounting kit & user manual