PrimoChill 12mm ID x 16mm OD Rigid Acrylic/PMMA Tubing - 750mm Length, Made with Premium Materials, Perfect Hardline for PC Watercooling, Packaged in the USA - 4 Pack - Clear

Rigid Acrylic Tube from PrimoChill is made from strong, clear acrylic and is designed to withstand high temperatures and better than other plastics. Acrylic tubing is preferred by some users over PETG for its higher melting point, more stain-resistant properties, superior clarity and scratch resistance. With PrimoChill tube, you can achieve tight bends without the need for excessive compression fittings or 90-degree angle rotaries. This reduces the time and money you spend searching for the right fitting in your build. Measure – Cut – Bend – Install - DONE! Trusted/Experienced Brand. Superior Clarity High Melting Point Thicker Wall for Safer Operation Specifications Inner Diameter: 12mm Outer Diameter: 16mm Wall Thickness : 2mm Length: 750mm / 29.5 inches Pack Size:4 Compatibility Fittings:16mm OD Rigid Compression Parts Included 4 Pieces of 750mm Acrylic tube Warnings With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. Not responsible for any damage caused by or when using this product. Please use at your own risk. Installation PLEASE NOTE: When using a bending insert with rigid tubing, remember it is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience, but will become easier the more you practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. Steps to success are below: 1. Stretch the bending insert. Remove any excess that isn’t stretched. 2. Ream the rigid tube with an RFB for best results, (or a hand reamer if that's all you have). This will ensure a clean opening for ea

• SIMPLIFYING WATERCOOLING: PMMA/Acrylic Tube is the perfect rigid watercooling tubing for those looking to get into custom PC building. Ideal length to make long runs or cut up to specific lengths with plenty left over. The unique construction offers superior durability compared to other tubes on the market, allowing users to be confident of its longevity.
• PROVEN LEADER: PMMA/Acrylic Tube itself is a dependable and cost-effective solution for all types of custom builds and continues to be the go-to product for both beginners and pros alike.
• CLARITY IN SIGHT: Crystal Clear for perfect viewing of your favorite coolant.
• TRUSTED BRAND: PrimoChill Rigid PMMA/Acrylic Tube provides customers with a user-friendly design, allowing customers to easily and quickly install the tube. With its high heat resistance, the PMMA/Acrylic material can withstand the demands of modern watercooling requirements without deforming.
• WHAT YOU GET: 4x PrimoChill 750mm Rigid PMMA/Acrylic Tubes created with virgin materials and designed for custom watercooling, designed and packaged here in the USA.