PVDF Hex Nut, #10-24 (Pack of 25)

Most often used on machine screws and threaded rod, these general purpose nuts are for low-strength assemblies. Hex Nuts have flat tops with chamfered corners; bottoms may be flat or chamfered. Hex drive systems are driven with a wrench.Polyvinylidene Fluoride, or PVDF, has a useful temperature range of -148 to 300 degrees Fahrenheit. PVDF exhibits similar properties to Kynar, a trade name of the Arkema Corporation. PVDF is generally used in applications requiring high purity, strength, and resistance to solvents, acids, bases and heat. It also generates little smoke during a fire event. PVDF exhibits below average strength as compared to Nylon 6/6, with tensile strength ranging from 5000 to 7000 psi (pounds per square inch) and impact strength of 1.2 foot pounds (on the Izod Impact Scale) as compared to 9000 psi, and 3 foot pounds, respectively. PVDF is stronger than PTFE and could be desirable where PTFE is not strong enough for the application. PVDF will absorb little or no water after 24 hours of exposure (less than 0.05% of weight impact). PVDF also has below average dielectric strength of 260 volts per millimeter (compared to 500 volts/mm for Nylon).A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

• Hex Nuts are appropriate for use in low-strength assemblies
• PVDF is suitable for applications that require high purity and low water absorption, along with greater strength than PTFE
• Drive system is a hexagon-shaped head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
• Ensure a lasting hold for any project