Quincy 10AF Bi-Metal Forced-Air Laboratory Oven, 0.6 Cubic Feet/17 Liter Capacity, 450 Degrees F/232 Degrees C Maximum Temperature, 120V

The Quincy Lab 10AF forced-air laboratory oven has a bi-metal thermostat for evaporating, annealing, and testing applications, and drying, baking, curing, heat-treating, and sterilizing parts. Forced air ovens provide uniform heat distribution within the chamber, and facilitate drying applications. The oven has a 0.6 cubic foot/17 liter capacity and a maximum temperature of 450 degrees F/232 degrees C. The oven has double-wall construction that is insulated with high-density mineral wool to maintain constant temperature and keep exterior cool to the touch. The bi-metal thermostat is dial-controlled, and the on/off rocker switch is illuminated to indicate power status. Low-watt density elements are compact to provide quick run-up and recovery times, and are Incoloy-sheathed for high-temperature heating and resistance to corrosive solutions. A perforated heat shield absorbs radiant heat to provide temperature uniformity and even heat distribution. The scratch-resistant hammered exterior is abrasion and corrosion resistant, and high-impact thermoplastic handles are durable and remain cool. SpecificationsMaximum temperature (Fahrenheit)450 degreesMaximum temperature (Celsius)232 degreesTemperature stability (Fahrenheit)+/- 6 degrees F at 300 degrees FTemperature stability (Celsius)+/- 3 degrees C at 150 degrees CCapacity0.6 cubic feet/17 litersInterior dimensions (H x W x D)8.25 x 12 x 10 inches/21 x 30.5 x 25.4 cmExterior dimensions (H x W x D)20.5 x 14 x 12.3 inches/52 x 35.6 x 31.2cmPower requirements120V/800W; US plug styleH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Quincy Lab, Inc. manufactures laboratory incubators and ovens. The company, established in 1973, is located in Chicago, IL.

• Forced-air laboratory oven for evaporating, annealing, and testing applications, and drying, baking, curing, heat-treating, and sterilizing parts
• Double-wall construction is insulated with high-density mineral wool to maintain constant temperature and keep exterior cool to the touch
• Bi-metal thermostat control with control dial and illuminated on/off rocker switch
• Low-watt density elements are compact to provide quick run-up and recovery times, and Incoloy-sheaths for high-temperature heating and resistance to corrosive solutions
• Scratch-resistant hammered exterior is abrasion and corrosion resistant, and high-impact thermoplastic handles are durable and remain cool