Relay Timer ZYS3R Infinite Power-On Dual-Control Dual-Cycle Delay Time ST3PR 1S10S30M60M 1Pcs(ZYS3R A DC24V)

Circuit Breaker PanelsDescribeCyclic delay, time relayWhen the power is turned on, the T1 time starts to delay. At this time, the relay contacts are in an open state. After the T1 delay time expires, the relay pulls in, and the T2 time delay starts at the same time. After the T2 delay time expires, the relay turns off again. Continuous cycle work.Instructions for use1. Connect the product to the control circuit according to the wiring diagram on the label of the relay cover.2. Adjust the fluctuation switch and potentiometer, set the delay time, delay time = toggle switch selection range × potentiometer percentage, it is recommended that users choose the delay specification as 30%~100% as much as possible to avoid overuse A large delay specification sets a large time deviation caused by a small delay time.3. Turn on the power, the relay starts to operate according to the corresponding working sequence diagram.Note: Relay repeated start interval 0.5SNote 2: The closing time of ZYS3K signal control terminal 3-4 should be ms, and the control terminal should not input voltage or ground, so as not to move or damage the product.Package Included1×Time relay with base Power Source : DCTheory : Voltage relayProtect Feature : Sealed Usage : ProtectiveContact Load : Low PowerModel Number : ZYS3RVoltage : DV24VAC220V

• Circuit Breaker Panels