Scapa Cloth Tape (175): 1 in. x 60 yds. (White)

<p><b>Scapa 175 Cloth Tape</b> is a general-purpose conformable cotton cloth tape single coated with a natural rubber adhesive. It's non-thermosetting adhesive and backing are suitable for skin contact. The tape is paintable. Uses of the Scapa 175 Cloth Tape include: motor coil winding; wire harness wrap and other bundling applications; general purpose tape for surfaces requiring a high degree of stain or corrosion resistance where high tensile strength is not required; electrical tape applications; and finger taping. Made in Canada.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: cotton cloth <br>- Adhesive: natural rubber <br>- Thickness: 10.5 mils (carrier, adhesive) 4 mils (adhesive) <br>- Adhesion: 32 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 36 pounds per inch (longitudinal) <br>

• Scapa 175 Cloth Tape is a general-purpose conformable cotton cloth tape single coated with a natural rubber adhesive. It's non-thermosetting adhesive and backing are suitable for skin contact
• The tape is paintable.
• Uses of the Scapa 175 Cloth Tape include motor coil winding; wire harness wrap and other bundling applications; general purpose tape for surfaces requiring a high degree of stain or corrosion resistance where high tensile strength is not required; electrical tape applications; and finger taping.
• Carrier/Backing: cotton cloth. Adhesive: natural rubber. Thickness: 10.5 mils (carrier, adhesive) 4 mils (adhesive).
• Adhesion: 32 ounces per inch (to stainless steel test panel). Adhesion to Backing: 20 ounces per inch. Tensile Strength: 36 pounds per inch (longitudinal). Core: 3-inch diameter.