Stiebel Eltron Mini 3-1 Tankless Electric Water Heater - 3.0 kW, 120 V, 25A, 0.4 GPM

<p>Stiebel Eltron 220816 Model Mini 3-1 Mini Single Handwashing Sink Tankless Electric Water Heater, 120 Volts, 3.0kW, 25A, Mechanical 0.40 GPM 1.5 l/min Flow Rate, 0.026 gal / 0.1 L Water Volume<br><br>The Stiebel Eltron Mini tankless water heaters are designed for installation at the point-of-use. The Mini heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini water heaters are equipped with a safety high-limit with manual reset. The combination of meticulous German engineering and the best available materials ensures that every Mini is of the highest quality. They have been designed for many years of trouble-free service. Installation after installation has proven they have the lowest failure rates of any tankless water heaters in the industry.<br><br>Key Features<br><br>Extremely compact design saves space<br><br>Major energy savings<br><br>Unlimited supply of hot water<br><br>Proven reliability<br><br>Sleek design is appealing and can be mounted in plain sight<br><br>Can be mounted with fittings pointing up or down<br><br>Pre-wired pigtail included<br><br><br>Specifications<br><br>Phase-50/60Hz: 1<br><br>Voltage: 120V<br><br>Wattage: 3.0kW<br><br>Amperage: 25A<br><br>Min. recommended circuit breaker size: 25A DP<br><br>Min. recommended wire size 2 copper: 10AWG<br><br>Min. flow to activate: Mechanical 0.40 GPM 1.5 l/min<br><br>Water temp. range: Electronic units are adjustable from 86-122F/30-50C<br><br>Energy Factor Mechanical: 0.99<br><br>Water volume in unit: 0.026 gal/0.1 l<br><br>Working pressure: 150 psi/10 BAR<br><br>Tested to pressure: 300 psi/20 BAR<br><br>Water connections: 3/8" O.D. flexible braided stainless steel hose connectors<br><br>Dimensions HxWxD: 6-1/2"x7-1/2"x3-1/4"<br><br>Weight: 3.44 lb</p>

• PRODUCT IDENTIFICATION: Stiebel eltron general 0.4 gpm — sourced direct from the manufacturer or authorized distributor. Designed for standard US residential install conditions across remodel, new-construction, and individual fixture replacement work.
• GENERAL INSTALLATION: Designed for standard US residential use — applied or installed per the manufacturer's directions on the labeled surfaces or substrates. Built to meet common US residential install specs across new-construction and replacement work.
• 0.4 GPM SIZE: Sized at 0.4 gpm — the standard residential spec for the intended application. Designed for standard US residential install conditions across remodel, new-construction, and individual fixture replacement work.
• STIEBEL ELTRON BRAND: Part of the Stiebel Eltron residential product line — backed by manufacturer support and warranty terms as specified by the brand. Sourced direct from the manufacturer or authorized distributor. Designed for standard US residential install conditions across remodel, new-construction, and individual fixture replacement work.
• RESIDENTIAL & COMMERCIAL USE: Designed for standard US residential and light-commercial install conditions across new-construction, full remodel, and individual unit replacement work. Pairs with matching same-brand accessory items where applicable.