VELURA 2Pcs 0.56in LED Display Module 4 Digit 7-Segment HT16K33 I2C Electronic|2 Pieces 0.56 4 Digit LED Display Modules|Individual LEDS| Electrical & Test Equipment |Business & Industrial

Product description Description:These 7-segment displays normally require 13 pins (5 characters and 8 total segments each).Solves the annoyance of using 13 pins or a bunch of chips by having an I2C constant-current matrix controller sit neatly on the back of the PCB.The controller chip takes care of everything, drawing all the LEDs in the background. All you have to do is write data to it using the 2-pin I2C interface.There are three address select pins so you can select one of 8 addresses to control up to 8 of these on a single 2-pin I2C bus (as well as whatever other I2C chips or sensors you like). The driver chip can the entire display from 1/16 brightness up to full brightness in 1/16th steps.It cant individual LEDs, only the entire display at once.Specification:Size: Approx. 5.03 x 2.68 x 1.2 cm/2 x 1.1 x 0.5 inchPackage Includes:2 Pieces 0.56 4 Digit LED Display ModulesNote:Color might be slightly different due to the color caliwomen Clothtion of each individual monitor.Please allow slightly measuring deviation due to manual measurement.Description:These 7-segment displays normally require 13 pins (5 characters and 8 total segments each).Solves the annoyance of using 13 pins or a bunch of chips by having an I2C constant-current matrix controller sit neatly on the back of the PCB.The controller chip takes care of everything, drawing all the LEDs in the background. All you have to do is write data to it using the 2-pin I2C interface.There are three address select pins so you can select one of 8 addresses to control up to 8 of these on a single 2-pin I2C bus (as well as whatever other I2C chips or sensors you like). The driver chip can the entire display from 1/16 brightness up to full brightness in 1/16th steps.It cant individual LEDs, only the entire display at once.Specification:Size: Manufacturer Contact Information pushpmaladelhia4@gmail.com,9355927969

• These 7segment displays normally require 13 pins (5 characters and 8 total segments each).
• Solves the annoyance of using 13 pins or a bunch of chips by having an I2C constantcurrent matrix controller sit neatly on the back of the PCB.
• The controller chip takes care of everything, drawing all the LEDs in the background.
• All you have to do is write data to it using the 2pin I2C interface.
• There are three address select pins so you can select one of 8 addresses to control up to 8 of these on a single 2pin I2C bus (as well as whatever other I2C chips or sensors you like).