Wii Remote Controller with Motion Plus Compatible with Wii and Wii U Console ECRAB Wii Controller with Silicone Case and Wrist Strap (White)

Specifications:Color: WhiteRemote size: 5.7 x 1.3 x 1.1 inchesBluetooth control distance: about 196 inchesConnecting instruction:Step 1: Open your Wii console;Step 2: Insert 2 AA batteries (not included) into the wii remote control then turn on remote;Step 2: press the red button in the wii console for one second after you press SYNC button in the remote controller. Connection is successful when only 1 light are on (press reset in wii console if 4 lights do not stop flashing, repeat steps 1 and 2). If the connection is lost, please check:1. If the battery voltage is below 2.3V, the connection may be broken. Please change to new batteries;2. The batteries could be loose;3. Please do not place the controller too close or too far from the Wii host. Keep the distance within 196 inchs.4. You can try holding down the red button on the back of the controller (SYNC button) and the SYNC button on the Wii console once again.(1) Please press the power switch of the Wii Console for more than 4 seconds.(2) After confirming that the power light turns red, unplug the AC adaptor.(3) Please unplug the battery of the Wii remote and wait for about 1 minute.(4) Please plug in the AC adaptor.(5) Insert the battery into the Wii remote control and press the power switch of the Wii Console.(6) Simultaneously press the red sync button on the Wii Console and Wii remote.Tips: Low-power instructions: The connection indicator flashes quickly.Please replace the new batteries in time when the low voltage alarm occurs.Please Note: powered by 2 AA batteries, but batteries are not included.Perhaps it would be better if you used rechargeable batteries.What you wii get?1 x Wii remote control with motion plus (without battery)1 x Silicone case for remoter1 x Wrist strap