Wind Speed Direction Sensor 3 Wind Cups S Type IP64 Integrated Anemometer for Environment 9V‑30V

Item Type: Wind Speed Direction SensorMaterial: ABS, Aluminum AlloySize: Approx. 458 x 232mm / 18 x 9.1inGross Weight: Approx. 1575g/3.5lbMeasuring Object: Wind Speed, Wind DirectionPower Supply Voltage: DC9V-30VSignal Output: RS485 for Modbus ProtocolMeasuring Range: Wind Speed 0-70m/sCable Length: Approx. 5.2m/17.1ftAccuracy: Wind Speed: ±(0.3+0.03V)m/s (V represents real time wind speed value), Wind Direction: ±3°Resolution: Wind Speed: 0.1m/s, Wind Direction: 1°Start Wind Speed: 0.5m/sMaximum Power Consumption: 0.9WLoad Capacity: DC12V Power Supply, Current Output Impedance 350Ω; DC24V Power Supply, Current Output Impedance 900Ω Voltage Output Impedance: 1KΩOperating Environment: Temperature: -35°C-60°C Humidity: 100%RH Non CondensingGuard Level: IP64Cable Rating: Rated Voltage: 300V 80°CWidely Used: Meteorology, Marine, Environmental, Airport, Port, Laboratory, Industry, , Traffic, etc.4 Installation Methods:1. Horizontal bottom mounting, wind direction must face upward2. Horizontal top mounting, wind direction must face upward3. Vertical side mounting, wind direction must face upward4. Pole mounting, wind direction must face upwardWire Connection Method:Red Wire: Power Positive PoleBlack Wire: A+Yellow Wire: B-Green Wire: Power Negative PoleStandard for ModBus RTU Communicate Protocol:Serial Port Format: 8 data bits, 1 stop bit, no parity, default baud rate 9600bps, serial debugging software set to hex send and receive, minimum interval between two comms at least 500ms, CRC in the manual is the parity, 2 bytes. Default device address is 1.for Modbus CRC Check Steps:1. The preset 16 bit register is hexadecimal FFFF, is called CRC register;2. The first 8 bit data is different from the lower part of the CRC register or put the result in the CRC register;3. Move the contents of the

• High Strength: Integrated wind direction sensor, assembled with aluminum alloy accuracy machined parts, aluminum alloy shell with high strength, light weight, easier to install, suitable for outdoor use.
• High Performance: The wind speed part adopts the traditional three wind cups structure, the wind cup uses imported ABS material, high strength and better start; large range, great linearity, convenient observation, stable and reliable.
• Professional: The wind part is a professional meteorological instrument used to measure the horizontal wind direction of the wind, its internal use of accuracy angle sensors, and the use of low inertia wind vane response to wind direction.
• Working Principle: Professional anemometer, when the wind direction changes, the tail rotates the shaft rod to drive the sensor magnet, and the angle sensor senses the magnetic pole orientation change.
• Multiple Installation And : Wind speed direction sensor with special fixing accessories design, can be installed horizontally or vertically, 4 installation methods, easy to use. External rain cover, built in airtight ring, IP64 and .